KTH 736 Grey Green Oxide Primer

KTH Industrial Primer is an economical solvent based metal and wood primer for both interior and exterior use. It is formulated to give good performance and longevity of the topcoat to enhance the quality.

DUE TO MONITOR DIFFERENCES, ACTUAL COLOR MAY VARY SLIGHTLY FROM WHAT APPEARS ONLINE.
CONTACT US FOR COLOR SAMPLES IF YOU NEED HELP SELECTING A FINISH.

USES
As primer in a multi-coat coating system. Most suitable for use onsteel, GI and others surfaces. Main for general industrial steel painting.

COMPOSITION
Pigment : Green oxide pigment.

Binder : Modified alkyd resin

Solvent : Hydrocarbon

COATING PROPERTIES:
Recommended Dry Film Thickness : 50-80 microns per coat

Recommended Wet Film Thickness : 70 - 115 microns per coat

Recommended Coating System : 1) AC 750 or AC 736 / 736 / 9600 HG (or 5953 HG) 2) 736 / 701 / 9600 HG (or 5953 HG)

Recommended Numbers of coat : One to two

Drying Time : Touch Dry–20 mins, Dry to handle –1 to 2 hours

Recoating interval : At least 8 hours

Curing Time : 1 day


SURFACE PREPARATION: 
Previous painted surface and bare substrate must be completely dry and free from rust, mill-scale, dirt, grease and other contaminants before painting. For maximum adhesion and durability of paint performance, all bare surfaces should be prepared by meant of sand paper, hand tools, power tools and etc.

APPLICATION METHOD
Method of Application : Brush, roller, and spray application.

Product Preparation : Stir mixture thoroughly before use. No thinning is required. However, 10% of thinner can be added for workability.

Pot Life (at 30oC) : No pot life limit.

SAFETY PRECAUTION:
1. This product is flammable. 

2. Keep away from sources of ignition.

3. Keep container tightly closed and keep out of reach of children.

4. Wear suitable personal protective clothing during painting.

5. Ensure adequate ventilation. Do not breathe or inhale spray mist.

6. Do not apply when the relative humidity exceeds 85%.

7. Avoid skin and eye contact. Spillage on skin should be removed immediately with cleanser, soap and water. Eye should be well flushed with water and seek medical advice immediately if discomfort persists.